HIGH FOAMING HARD SURFACE CLEANER
PRODUCT DESCRIPTION
- A high foaming hard surface cleaner that removes scale deposits, calcium haze, lime build up rust stains and soap scum (apply undiluted).
- Solvent free for use on hard plastics and fibre-glass showers. For best results use with a foaming trigger to dissolve stains and build-up.
- Not suitable for prolonged use on cement grouted tiles – (use All-In-One by Arnold Products)
DIRECTIONS
- Toilets and Urinals – Apply undiluted. Pay special attention to under the rim. Brush and leave overnight.
- Showers and Bath Scum – Apply diluted 1 part Bath and Shower Cleaner in 10 parts water (100ml per litre). Allow time for foam to soften build-up before hosing off. Best coverage with foaming trigger-spray.
- Taps, Sinks, Bench Tops - Dilute 1 to 10 (100ml per litre) apply and sponge the surface. Rinse well with water.
- Floors - Dilute 1 part to 10 parts water, mop and rinse with water.
PRECAUTIONS
- Store in original container.
- Do not mix with other chemicals.
- Rinse container when finished, recycle where possible.
- Keep out of reach of children.
- Not compatible with bleach type products.
WARNINGS
- Contains 8gm / litre phosphoric acid.
- Contains quaternary antibacterial ingredient.
- May be harmful if ingested.
FIRST AID
- Ingestion: drink 1-2 glasses of water. Seek medical advice. Do not Induce vomiting. Do not give anything by mouth to an unconscious or convulsing patient.
- Skin Contact: rinse with cold water for 15 minutes and seek medical advice if irritation persists.
- Eye contact: flush with cold water for 15 minutes and seek medical advice if irritation persists.
- Inhalation: remove from further exposure. Seek medical advice if discomfort continues.
- Spillage: contain spillage with absorbent and dispose in accordance with local regulations.
ns.
